The aperture controls the amount of light that reaches a digital camera sensor. An aperture acts much like the pupil of an eye that opens wider as light decreases to let in more available light. The pupil gets smaller when light increases to reduce the amount of light entering the eye.
The combination of aperture and shutter speed are related, and effect the exposure value. The faster the shutter speed, the larger the opening of the lens and visa versa.
F-stops
The diameter of an aperture is measured in f-stops. A lower f-stop number opens the aperture and admits more light onto the camera sensor. Higher f-stop numbers make the camera's aperture smaller so less light hits the sensor.
When an aperture is opened up by one f- stop, the amount of light which reaches the sensor is doubled. F-stops are expressed in three different ways: f/8, f-8, and 1:8.
Aperture settings can be used creatively to control depth of field, how much of a photo is sharp in front and back of where you focus on the main subject. The technique is useful for close-up and portrait shots.
Aperture Priority Mode
All digital cameras have exposure modes that automatically control the aperture and shutter speed. But many allow you to manually change the aperture.
When using aperture priority mode, you change the aperture and the shutter speed is automatically changed to maintain proper exposure.
credit to Digicam help
2 comments:
How to switch n to aperture priority?
Pak Wi, I’m usually set my camera to manual at every time i shoot the photo. That’s why I’m not so familiar with all the auto setting command.
but i have quick 'Google' how to switch to aperture priority with your camera, its AE (A Mode) - i refer to here http://www.oztion.com.au/buy/auction.aspx?itemid=3945400
also i found with your camera if you switch to Aperture priority mode, the F will be set to 8 all the time. F8 is a very poor F for me.
my advise always try to use manual with your gadget
Post a Comment